Removal of Algae and Moulds

Description

Algae is a tiny plant form. It has no roots nor leaves. As a result, it can grow on almost any surface. Algae thrives in places that are damp and have strong sunlight. Therefore, the external facade of buildings, roads, and walls are perfect habitats for algae to spread in ideal conditions.

In sunny and damp Singapore, algae is common problem in most homes. Algae are usually characterised as green to blackish marks on walls, roofs, and external facade of buildings, and external pipes.

Mold generally occurs in damp areas. It is, at best, an unsightly nuisance and, at worst, a health hazard. If you have mold growing on concrete driveways, brick walkways or paving stone patios around your home, the first thing to do is to make sure your children and pets do not have access to the area until you can remove the mold.

Why Remove Mold?

Mold spores can cause a variety of physical symptoms, including shortness of breath, aggravated asthma, sinus congestion, coughing, itchy eyes and much more.

Of course, there is a difference between common molds (like we see on food and sometimes on structures) and the toxic black mold that we hear about on the news. If you think you have toxic black mold growing on your paving stones, concrete or bricks, it is best to bring in mold remediation experts who can safely remove this potential health hazard.

If you have a bit of mold or algae on your exterior surfaces and would like to take care of it yourself, here are some basic algae and mold removal tips to help you get the job done.

How to get rid of Algae: 

We recommend the use of Algae and Moss Remover. This product allows self-active removal of algae, green patina and green deposits and protects against recurrence.

1. Ensure that the surface to be treated must be dry – algae grows very quickly when expose to water.

2. Use Algae and Moss Remover diluted with water up to 1:20 according to the amount of green patina.

3. Wet the surface well and evenly with the diluted solution.

4. Do not rinse and allow to work-in for a minimum 24 hours.

5. Residues should disappear without further treatment of the surface.

6. In case of stubborn staining, use a stiff brush or scrubbing tool, or allow to work-in for longer.

7. If necessary, repeat the application.

8. Clean working tools with water after use.

Supplies for Removing Mold & Algae
Gloves
Eye protection
Dust mask
Stiff push broom or deck brush
Pressure washer
Wepos Algae Moss Remover